Scientific Air Management

Why Choose The S400

Disinfect Large Volumes of Air Quickly

99.9995% kill rate airborne virus, bacteria, mold

After the first phase HEPA particulate filtration induction, many pathogens smaller than the 0.3 micron HEPA limitation size are further processed into the S400 patented UV-C Air Suspension Chamber. Here is where the key to UV-C air disinfection takes place. Germs are held close enough and long enough to UV-C light waves for thorough elimination. Our patented aerosolized pathogen suspension technology results in a laboratory verified kill rate of up to 99.9995% of airborne bacteria, virus, and mold.  See the Laboratory Results

Measured with strict testing protocol

Rigorously tested in EPA and FDA guideline protocol third party nationally recognized aerosol laboratories, the S400 is tested in one of the nation’s leading full size (10’ x 10’ x 8’) aerosol pathogen testing chambers. MicroChem Laboratories have shown conclusive proof of up to a 99.9995% kill rate of airborne virus like the non-enveloped positive-stranded RNA
norovirus surrogate (one of the most difficult viruses to kill) and bacteria (surrogates for C.diff and TB)  in under 60 minutes. See the Laboratory Results

Particulate control

Fundamental air management begins with particulate reduction and so does the S400. Utilizing HEPA first phase filtration with our unique 360-degree and high CFM volume air induction process, the S400 removes airborne particulates (< 0.3 micron size) in a standard room quickly and continuously. Large scale particulate reduction is noted in minutes and maintained constantly regardless of room traffic and fluctuations or inconsistencies within the HVAC system.   See the Case Study

Odor & VOC removal

Building on technologies from the Medical Cannabis Indoor Growing Industry, S400 uses an exclusive manufacturing process of enriched carbon substrates as part of our ODOR and VOC removal. This exclusively treated substrate is super efficient, long-lasting, and highly resistant to moisture saturation.

Hospital Staff and Patient Friendly

Patient & Staff friendly with minimal maintenance requirements

The S400 provides 99.9995% clean air safely, efficiently, and quietly 24/7 in occupied spaces via our patented:

  • 360-degree air flow UV-C germ eradication process
  • Continuous and uniform non-detectable air vortex
  • No harmful byproducts, no ozone, and no ionization

The S400 helps provide a safer work environment for staff and a safer medical environment for patients. No harmful byproducts created, no ozone, no ionization, and no R.O.S. (Radically Oxygenated Species). Staff friendly with simple DIY annual maintenance and no technical training.  See the Service Manual 

Continuous UV-C air scrubbing with NO ozone or byproducts

A single S400 unit can provide standard whole-room UV-C air scrubbing in less than 30 minutes. The S400 maintains high levels of particulate, pathogen, and odor removal continuously, providing high rates of disinfected CFM (Cubic Feet per Minute) with ZERO by-product production, NO ozone, NO oxidation, NO ROS (Radically Oxygenated Species) just 99.9995% disinfected clean air.

Trusted by Infection Prevention, Facility Engineers, & EVS Professionals

The S400 units are currently working in 100’s of hospitals keeping patients and staff safer in spaces like:

  • ORs
  • ERs
  • Patient rooms
  • Long term care
  • Intensive Care
  • Isolation Rooms
  • Waiting areas
  • Cafeterias
  • Nurse stations
  • Laboratories
  • Morgues
  • Areas that require airborne pathogen and odor elimination

For over 5 years the S400 has served the likes of  NYU Langone Medical Center, University of Rochester Medical Center, Federal VA Hospital System, Baptist Health Hospitals, Riverside Hospital Californian, Kaiser Permanente Medical and Hospital Centers,  St. Joseph’s Hospital, NYC Health and Hospitals, and many more.

Powerful Whole Room Air Exchange 

Facility Engineer approved

Facility directors realize the need for large air volume treatment to manage airborne transmissions in critical areas or where source contamination is present. The S400’s mobile and fast air disinfection process helps eliminate air borne contaminants, hospital pathogens, and odors of all types, easily deployed quickly and quietly.

The S400’s – high-volume CFM air process can contribute greatly to ACPH (air exchanges per hour) in any facility space.

With easy to read on-board digital screen reporting:

  1. HEPA/Airflow Integrity
  2. UV-C Light Integrity
  3. Carbon Final Filter Integrity
  4. Total Air Processing by Room Meter

Staff can quickly access the S400 operational status with no special training.

No Airflow Disturbance works with HVAC

The S400’s unique 360-degree airflow process provides very low-pressure, large volume viscous air movement. This process creates continuous, large-scale muted air-flow vortices throughout the room. Thanks to these subtle vortices and their complex interactions, whole room air scrubbing is achieved unnoticed by both patients and staff.

This process allows for uninterrupted air processing 24/7 while the room is occupied. These efficiencies have been hospital tested to remain constant regardless of inconsistencies in existing HVAC systems. See the HVAC Compatibility Case Study 

Neutral pressure with no temperature or humidity changes

The S400 provides high volume air disinfection at the source with absolutely zero effect on negative or positive air pressure. The S400 can be used in either negative or positive air pressure situations and will not affect air temperature or humidity. This means uninterrupted air disinfection 24/7 in occupied rooms of any kind.

High volume air disinfection

The S400 uses proprietary UV-C technology to capture and hold pathogens long enough in our intense UV-C killing chamber to scrub large volumes of fast-moving air.

You can calculate how quickly the S400 – (cubic feet per minute) system will clean the air in a room by:

  1. Calculating the volume of your room in cubic feet (length x width x height)
  2. Multiple the room’s cubic feet by 60 (60 minutes in an hour)
  3. Dividing this number by (S400’s CFM)

The S400’s high volume CFM capabilities contribute to Air Exchange Rates (ACH) in the room. The higher the ACH the greater amount of air is being exchanged (disinfected) per hour.

Proven and Tested in Facilities with EPA and FDA Guideline Compliance

  • EPA Guideline Protocol Bio-Aerosol Test Chambers
  • Aerosolized Test Chambers Standard Room Size 800 Cubic Feet (10’x10’x8′)
  • Fast Contact times 30-60 minutes
  • Virus pathogen species non-enveloped positive-stranded RNA surrogate
  • Bacterial surrogate species representative of C-dif and TB
Get In Touch